Specificities:

The extraction capabilities of our equipment rely on:

• EXISTING CASING DIAMETERS:

The diameter of our collector tube is sized according to the casing diameter.

• WORKING LEVEL:

The number of cycles per day depends on the working level, descent and lifting speeds, dwell and discharge time, which are monitored by means of our special device. Our system works under a skimming effect in the fluid column found in the casing. Once enough energy exists in the reservoir resulting in an oil level above the perforations or open hole part of the well, the working levels will depend upon the parameters programmed in our system. The working level will be determined according to acceptable conditions (specific to each well) checked during the test period.

• WELL PRODUCTION:

The unique adaptability of our equipment to well production enables adjustments of the different sequences of extraction to avoid typical depleted wells production problems such as high water cut or presence of sand.

Reminder: To be able to determine fluid quantities that can be recovered per day, a few days of testing is required in order to define all of the operating parameters such as working depths, descent and lifting speeds (300feet/minute max.), filling up and draining times. (see “Well testing” menu)

Oil Characteristics:

A large majority of suspended wells can be reactivated with our technology.
Crude Oils with a pour point of 32° centigrade and 15° API density have successfully been extracted.